Workshop table leg DPN 01AEV 02

• In stock

Code: DPT_01_A

32.12 Eur without VAT

(38.87 Eur with VAT)

Reinforcing connector type DPT 01 A, 1200 x 100 x 48 mm, color light gray RAL 7035.

• In stock

Code: DPT_02_A

35.20 Eur without VAT

(42.59 Eur with VAT)

Reinforcing connector type DPT 02 A, 1700 x 100 x 48 mm

Code: DPS_01_BS40

194.64 Eur without VAT

(235.51 Eur with VAT)

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Code: DPS_02_BS40

226.14 Eur without VAT

(273.63 Eur with VAT)

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Code: DPS_02_BS50

359.66 Eur without VAT

(435.19 Eur with VAT)

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Code: DPS_01_BS50

272.27 Eur without VAT

(329.45 Eur with VAT)

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Code: DPS_01_BS25

153.57 Eur without VAT

(185.82 Eur with VAT)

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Code: MTS_02_BS25

191.25 Eur without VAT

(231.41 Eur with VAT)

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Code: DPS_01_MP40

425.04 Eur without VAT

(514.30 Eur with VAT)

Worktops beech multiplex, width 1500 or 2000 mm x depth 750 mm, thickness 40 mm. Made of layered and glued beech veneer, sanded and treated with a solution of linseed oil with additives, chamfered upper peripheral edges.

Code: DPS_02_MP40

425.04 Eur without VAT

(514.30 Eur with VAT)

Worktop beech multiplex, width 2000 mm x depth 750 mm, thickness 40 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Code: DPS_01_BS40_M

344.02 Eur without VAT

(416.26 Eur with VAT)

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm.

Code: DPS_02_BS40_M

391.73 Eur without VAT

(473.99 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 850 mm.

Code: DPS_02_BS50_M

510.20 Eur without VAT

(617.34 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Code: DPS_01_BS50_M

422.16 Eur without VAT

(510.81 Eur with VAT)

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Code: DPS_01_BS25_M

303.04 Eur without VAT

(366.68 Eur with VAT)

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Code: MTS_02_BS25_M

344.11 Eur without VAT

(416.37 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Code: DPS_01_BS40_U1

226.30 Eur without VAT

(273.82 Eur with VAT)

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The front edge of the board is plated with zinc or stainless steel sheet 1 mm thick in a U shape - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Code: DPS_02_BS40_U1

286.88 Eur without VAT

(347.12 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Code: MTS_02_BS25_U1

239.30 Eur without VAT

(289.55 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Code: DPS_01_BS25_U1

200.53 Eur without VAT

(242.64 Eur with VAT)

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Code: DPS_01_BS40_O1

265.49 Eur without VAT

(321.24 Eur with VAT)

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Code: DPS_02_BS40_O1

324.56 Eur without VAT

(392.72 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Code: MTS_02_BS25_O1

273.13 Eur without VAT

(330.49 Eur with VAT)

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The plate is plated with zinc sheet 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Code: DPS_01_BS25_O1

224.08 Eur without VAT

(271.14 Eur with VAT)

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Code: DPS_01_BS40_G1

328.47 Eur without VAT

(397.45 Eur with VAT)

Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Code: MTS_02_BS25_G1

370.86 Eur without VAT

(448.74 Eur with VAT)

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Code: DPS_01_BS25_G1

287.63 Eur without VAT

(348.03 Eur with VAT)

Worktop beech joint with rubber, width 1500 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Code: DPS_02_BS40_G1

416.84 Eur without VAT

(504.38 Eur with VAT)

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Code: DPS_01_LM25_G1

272.46 Eur without VAT

(329.68 Eur with VAT)

LTD worktops with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Code: MTS_02_LM25_G1

337.80 Eur without VAT

(408.74 Eur with VAT)

LTD worktop with rubber, width 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray.

Code: DPS_01_LM25

140.90 Eur without VAT

(170.49 Eur with VAT)

LTD worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Code: MTS_02_LM25

149.00 Eur without VAT

(180.29 Eur with VAT)

LTD worktop, width 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Code: DPS_01_PP15BS25

584.01 Eur without VAT

(706.65 Eur with VAT)

Beech joint worktops with PP or PE board, width 1500 or 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint provides good physical properties and the PP and PE boards in turn provide good chemical properties. The color of the plates is white.

Code: DPS_01_PE15BS25

589.16 Eur without VAT

(712.88 Eur with VAT)

Beech joint worktop with PE board, width 1500 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Code: MTS_02_PE15BS25

613.27 Eur without VAT

(742.06 Eur with VAT)

Worktop beech joint with PE board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Code: MTS_02_PP15BS25

619.73 Eur without VAT

(749.87 Eur with VAT)

Beech joint worktop with PP board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PP board, in turn, good chemical properties. The color of the plates is white.

• In stock

Code: DPN_01_A

62.40 Eur without VAT

(75.50 Eur with VAT)

Basic version of the leg type DPN 01 A, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_B

101.18 Eur without VAT

(122.43 Eur with VAT)

Height-adjustable leg design, type DPN 01 B, height 790 - 1030 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_02_AO

118.89 Eur without VAT

(143.86 Eur with VAT)

Leg with swivel wheels with brake type DPN 02AO, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_02_AP

103.03 Eur without VAT

(124.67 Eur with VAT)

Leg with fixed wheels type DPN 02AP, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_C

134.72 Eur without VAT

(163.01 Eur with VAT)

Leg with lockable door and shelf type DPN 01C, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_AE_01

212.73 Eur without VAT

(257.40 Eur with VAT)

Leg with two electric sockets 230V / 16A type DPN 01AE 01, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_AEV_01

466.91 Eur without VAT

(564.96 Eur with VAT)

Leg with two electrical sockets 230V / 16A and two quick couplings for air connection. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_AV

204.77 Eur without VAT

(247.77 Eur with VAT)

Leg with two quick couplings for air connection. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Code: DPN_01_AE_02

514.25 Eur without VAT

(622.24 Eur with VAT)

Leg with one electrical socket 230V / 16A and one electrical socket 400V / 16A. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.