Code: VND_DPK_11C
Internal division of VND DPK 11C sockets43.90 Eur without VAT
(53.12 Eur with VAT)
Internal division of sockets DPK VND 11. Installation is possible in sockets where the height of the socket front is 60 - 120 mm.
Code: DPP_02_E1
One-door container with one drawer DPP 02E, width 500, height 660, depth 700 mm. 1x 90mm drawer, 1x 450mm door + 1x adjustable full description and parameters
One-door container with one drawer DPP 02E, width 500, height 660, depth 700 mm. 1x 90mm drawer, 1x 450mm door + 1x adjustable shelf. Body color RAL 7035 light gray.
Code: VND_DPK_11C
Internal division of VND DPK 11C sockets43.90 Eur without VAT
(53.12 Eur with VAT)
Internal division of sockets DPK VND 11. Installation is possible in sockets where the height of the socket front is 60 - 120 mm.
Code: 7000168
Plastic dividing insert VND 700016839.14 Eur without VAT
(47.36 Eur with VAT)
Plastic dividing insert for VND DPK PD sockets.
Code: VND_DPK_11A
Internal division of sockets VND DPK 11A25.06 Eur without VAT
(30.32 Eur with VAT)
Internal division of sockets DPK VND 11A. Installation is possible in sockets where the height of the socket front is 60 - 120 mm.
Code: VND_DPK_11B
Internal division of VND DPK 11B sockets35.61 Eur without VAT
(43.09 Eur with VAT)
Internal division of sockets DPK VND 11. Installation is possible in sockets where the height of the socket front is 60 - 120 m.
KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.
Surface treatment is carried out by the technology of electrostatic application of powder colors on the surface of products pre-treated with Fe phosphate. The colors are fired at a temperature of min. 180 °C approx. 20 min. Using automatic paint application and manual spraying, a uniform color layer is achieved, the thickness of which is on average 50-80 μm.
Surcharges in % according to the ordered quantity in CZK without VAT | |||||||
Body / front face combination | from CZK 0 | from 10,000 | from 20,000 | from 50,000 | from 100,000 | from 250,000 | from 500,000 |
AA + AB | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
AC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
AD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
BA + BB | 10 | 8 | 6 | 3.5 | 1.5 | 1 | 0 |
BC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
BD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
CA + CB | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
CC | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
CD | 100 | 50 | 25 | 20 | 8 | 6 | 5 |
DA + DB | 80 | 45 |
20 | 15 |
6 |
4 |
3 |
DC + DD |
100 | 50 | 25 | 20 | 8 | 6 | 5 |
Category E | individual surcharge |