Code: QDN_50_01
Bracket set for Q-system QDN 500174.50 Eur without VAT
(90.15 Eur with VAT)
Set of brackets for the Q-system QDN 5001.
Code: QSP_03_B
Q SYSTEM panel for wall mounting, height 800, height 1448, depth 25 mm. full description and parameters
Q SYSTEM panel for wall mounting, height 800, height 1448, depth 25 mm.
| Height: | 800 mm |
|---|---|
| Width: | 1448 mm |
| Depth: | 25 mm |
| Mass: | 12.4 kg |
| Warranty (years): | 2 |
| Manufacturer: |
|
Code: QDN_50_01
Bracket set for Q-system QDN 500174.50 Eur without VAT
(90.15 Eur with VAT)
Set of brackets for the Q-system QDN 5001.
Code: QDN_50_02
Bracket set for Q-system QDN 500246.90 Eur without VAT
(56.75 Eur with VAT)
Set of holders for Q-system QDN 5002.
Code: QDN_50_03
Bracket set for Q-system QDN 500373.01 Eur without VAT
(88.34 Eur with VAT)
Set of brackets for Q-system QDN 5003.
Code: QDN_50_04
Bracket set for Q-system QDN 500468.82 Eur without VAT
(83.27 Eur with VAT)
Set of holders for Q-system QDN 5004.
Code: QDN_38_01
QDN 38 bit holder27.03 Eur without VAT
(32.71 Eur with VAT)
Bit holder, set of 5 pcs.
Code: QDN_23_01
Single hook 45° QDN 23 (4 models)19.92 Eur without VAT
(24.10 Eur with VAT)
Single hook 45° - length 35 mm, set of 5 pcs.
Code: QDN_21_01
Single hook 90° QDN 21 (4 models)19.92 Eur without VAT
(24.10 Eur with VAT)
Single hook 90° - length 35 mm, set of 5 pcs.
Code: QDN_46_01
Hook loop 0° QDN 46 (3 models)22.85 Eur without VAT
(27.65 Eur with VAT)
Hook loop 0° - length 50 mm, set of 5 pcs.
Code: QDN_45_01
Hook loop 45° QDN 45 (3 models)22.85 Eur without VAT
(27.65 Eur with VAT)
Hook loop 45° - length 60 mm, set of 5 pcs.
Code: QDN_44_01
Hook loop 90° QDN 44 (3 models)22.85 Eur without VAT
(27.65 Eur with VAT)
Hook loop 90° - length 60 mm, set of 5 pcs.
Code: QDN_43_01
Rail for hanging plastic boxes QDN 43, L = 100 mm (3 models)13.08 Eur without VAT
(15.83 Eur with VAT)
Bar for hanging plastic boxes - length 100 mm. Set of 5 pcs.
Code: QDN_42_01
Storage box QDN 4235.60 Eur without VAT
(43.08 Eur with VAT)
Storage box, set of 5 pcs. Height 30 x width 150 x depth 80 mm.
Code: QDN_29_01
Socket holder 1/4" QDN 2938.29 Eur without VAT
(46.33 Eur with VAT)
1/4 socket head holder, set of 5 pcs.
Code: QDN_30_01
Socket holder 1/2" QDN 3041.83 Eur without VAT
(50.61 Eur with VAT)
Socket socket holder 1/2", set of 5 pcs. Color galvanized.
Code: QDN_27_01
Allen key holder QDN 2717.22 Eur without VAT
(20.84 Eur with VAT)
Allen key holder, set of 5 pcs. Color of zinc.
Code: QDN_34_01
Key holder 1 QDN 3415.73 Eur without VAT
(19.03 Eur with VAT)
Key holder 1, set of 5 pcs.
Code: QDN_35_01
Key holder 2 QDN 3515.17 Eur without VAT
(18.36 Eur with VAT)
Key holder 2, set of 5 pcs. Color of zinc.
Code: QDN_36_01
Key holder 3 QDN 3616.61 Eur without VAT
(20.10 Eur with VAT)
Key holder 3, set of 5 pcs. Color of zinc.
Code: QDN_37_01
Key holder 4 QDN 3713.68 Eur without VAT
(16.55 Eur with VAT)
Key holder 4, set of 5 pcs. Color of zinc.
Code: QDN_41_01
Magnetic holder QDN 4132.34 Eur without VAT
(39.13 Eur with VAT)
Magnetic holder, set of 5 pcs. Color of zinc.
Code: QDN_40_01
QDN 40 cable holder27.03 Eur without VAT
(32.71 Eur with VAT)
Cable holder, set of 5 pcs. Color of zinc.
Code: QDN_39_01
Spray holder QDN 3920.80 Eur without VAT
(25.17 Eur with VAT)
Spray holder, set of 5 pcs. Color of zinc.
Code: QDN_32_01
File holder QDN 3217.82 Eur without VAT
(21.56 Eur with VAT)
File holder, set of 5 pcs. Color of zinc.
Code: QDN_31_01
Ratchet holder QDN 3122.57 Eur without VAT
(27.31 Eur with VAT)
Ratchet holder, set of 5 pcs.
Code: QDN_33_01
Screwdriver holder QDN 3310.70 Eur without VAT
(12.95 Eur with VAT)
Screwdriver holder, set of 5 pcs. Color of zinc.
Code: QDN_28_01
Holder for punches QDN 2819.92 Eur without VAT
(24.10 Eur with VAT)
Punch holder, set of 5 pcs. Color of zinc.
Code: QDN_26_01
Double hook 0° QDN 26 (3 models)22.57 Eur without VAT
(27.31 Eur with VAT)
Double hook 0° - length 50 mm, set of 5 pcs.
Code: QDN_24_01
Double hook 45° QDN 24 (4 models)23.73 Eur without VAT
(28.71 Eur with VAT)
Double hook 45° - length 35 mm, set of 5 pcs.
Code: QDN_22_01
Double hook 90° QDN 22 (4 models)23.73 Eur without VAT
(28.71 Eur with VAT)
Double hook 90° - length 35 mm, set of 5 pcs.
Code: QDN_25_01
Single hook 0° QDN 25 (3 models)19.31 Eur without VAT
(23.37 Eur with VAT)
Single hook 0° - length 50 mm, set of 5 pcs.
Code: QDN_47_02
Hanging shelf 600 mm QDN 470221.68 Eur without VAT
(26.23 Eur with VAT)
Hanging shelf 600 mm.
Code: QDN_48_01
QDN 48 drawer rail holder12.19 Eur without VAT
(14.75 Eur with VAT)
Drawer rail holder, 1 pc.
Code: QDN_47_01
Hanging shelf 300 mm QDN 470117.82 Eur without VAT
(21.56 Eur with VAT)
Hanging shelf 300 mm, 1 pc.
Code: QDN_49_01
Document holder A4 QDN 4910.42 Eur without VAT
(12.61 Eur with VAT)
A4 document holder, price for 1 pc. Height 260 x width 227 x depth 25 mm.
Code: QSP_02_A
Q-system wall panel QSP 02A76.08 Eur without VAT
(92.06 Eur with VAT)
Q SYSTEM wall for wall mounting, height 494, width 988, depth 25 mm.
Code: QSP_03_A
Q-system wall panel QSP 03A77.30 Eur without VAT
(93.53 Eur with VAT)
Q SYSTEM wall for wall mounting, height 494, width 1482, depth 25 mm.
Code: QSP_01_A
Q-system wall panel QSP 01A39.85 Eur without VAT
(48.22 Eur with VAT)
Q SYSTEM wall for wall mounting, height 494, width 494, depth 25 mm.
Code: QSP_01_B
Q-system wall panel QSP 01B27.37 Eur without VAT
(33.12 Eur with VAT)
Q SYSTEM panel for wall mounting, height 400, width 400, depth 25 mm.
Code: QSP_02_B
Q-system wall panel QSP 02B46.74 Eur without VAT
(56.56 Eur with VAT)
Q SYSTEM panel for wall mounting, height 800, width 800, depth 25 mm.
Code: QSP_04_B
Q-system wall panel QSP 04B95.35 Eur without VAT
(115.37 Eur with VAT)
Q SYSTEM panel for wall mounting, height 800, width 1948, depth 25 mm.
KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.
  |
Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm. |
|||
 |
Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray. |
|||
 |
Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm. |
|||
 |
The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm. |
|||
  |
There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.
|
|||
 |
PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black. Main advantages of PP board: - light, stable, elastic, sterile |
|||
|
PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black. The main advantages of PE board: - higher chemical resistance |
light gray RAL 7035 (A)
yellow RAL 1023 (B)
red RAL 3000 (B)
blue RAL 5012 (B)
green RAL 6024 (B)
dark gray RAL 7031 (B)
gray / front surfaces blue
RAL 1001
RAL 2008
RAL 3003
RAL 5003
RAL 5005
RAL 5010
RAL 5018
green RAL 6001
RAL 7032
RAL 8014
RAL 9003
RAL 1003
RAL 1007
RAL 1013
RAL 1015
RAL 1016
RAL 1017
RAL 1018
RAL 1021
RAL 1028
RAL 1033
RAL 2000
RAL 2002
RAL 2004
RAL 2009
RAL 2011
RAL 2012
RAL 3001
RAL 3002
RAL 3004
RAL 3005
RAL 3011
RAL 3020
RAL 4003
RAL 4006
RAL 4008
RAL 5002
RAL 5007
RAL 5008
RAL 5009
RAL 5011
RAL 5013
RAL 5014
RAL 5015
RAL 5017
RAL 5023
RAL 5024
RAL 6005
RAL 6017
RAL 6018
RAL 6019
RAL 6029
RAL 6033
RAL 6034
RAL 7001
RAL 7005
RAL 7012
RAL 7015
RAL 7016
RAL 7034
RAL 7036
RAL 7037
RAL 7038
RAL 7040
RAL 7043
RAL 7044
RAL 8004
RAL 8011
RAL 8016
RAL 8017
RAL 8019
RAL 9001
RAL 9002
RAL 9004
RAL 9005
RAL 9010
RAL 9011
RAL 9018
Surface treatment is carried out by the technology of electrostatic application of powder colors on the surface of products pre-treated with Fe phosphate. The colors are fired at a temperature of min. 180 °C approx. 20 min. Using automatic paint application and manual spraying, a uniform color layer is achieved, the thickness of which is on average 50-80 μm.
| Surcharges in % according to the ordered quantity in CZK without VAT | |||||||
| Body / front face combination | from CZK 0 | from 10,000 | from 20,000 | from 50,000 | from 100,000 | from 250,000 | from 500,000 |
| AA + AB | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| AC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| AD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| BA + BB | 10 | 8 | 6 | 3.5 | 1.5 | 1 | 0 |
| BC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| BD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| CA + CB | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| CC | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| CD | 100 | 50 | 25 | 20 | 8 | 6 | 5 |
| DA + DB | 80 | 45 |
20 | 15 |
6 |
4 |
3 |
| DC + DD |
100 | 50 | 25 | 20 | 8 | 6 | 5 |
| Category E | individual surcharge | ||||||
