Call FREE 800 888 868, Mon-Thurs 8:00-17:00, Fri 8:00-16:00

0.00 Eur

Total excluding VAT:
0.00 Eur
Total to be paid with VAT:
0.00 Eur

Cabinet for storing chemical substances SCH 0050

Code: SCH_0050

Cabinet for storing chemicals and oils. The cabinet is equipped with 2 tubs with a robust perforated galvanized grid and 1 full description and parameters

Color of drawers / doors:

Made to order, delivery time 4 - 6 weeks. It may vary depending on the manufacturer's capacity.

899.49 Eur 1 088.38 Eur with VAT

Quantity

First select the parameters

Description and technical parameters

Cabinet for storing chemical substances SCH 0050

Cabinet for storing chemicals and oils. The cabinet is equipped with 2 tubs with a robust perforated galvanized grid and 1 cassette with a robust perforated galvanized grid. Height 1950 x width 1000 x depth 600 mm, load capacity of tub 60 kg, load capacity of cassette 140 kg, load capacity of body 300 kg. Body color gray RAL 7035.

  • 2x adjustable tub with perforated grid for catching leaking liquids
  • 1x cassette with perforated grid for catching leaking liquids
  • perforated cabinet doors to ensure proper ventilation
  • in the cabinet door there is a pocket for storing documents related to stored liquids
  • two-point locking
  • height 1950 x width 1000 x depth 600 mm
  • cassette dimensions: height 140 x width 830 x depth 565 mm
  • bath capacity 80 kg
  • Bath volume 28 l
  • cartridge capacity 140 kg (2x 60 l drums)
  • cassette volume 62 l (for a 60 l barrel)
Height: 1950 mm
Width: 1000 mm
Depth: 600 mm
Mass: 139 kg
Welded product: Yes
Warranty (years): 2
Manufacturer:

Similar products

Information / documents

  • Workshop table configurator
  • KOVOS worktops
  • Documents to download
KOVOS electronic workshop table configurator

KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.

Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm.

Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray.

Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm.

The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm.

There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.

smooth rubber 4 mm

wheel pattern 4 mm

grooved rubber 6 mm

PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black.

Main advantages of PP board:

- light, stable, elastic, sterile
- high insulating ability
- high load shock absorbing
- acid resistant
- safe for food
- recyclable
- production without additives harmful to the environment and health

PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black.

The main advantages of PE board:

- higher chemical resistance
- good impact expansion
- shock-absorbing and impact-resistant even at low temperatures
- well weldable
- well thermoformable
- waterproof
- very good electrical insulation capabilities
- recommended for food storage
- physiologically unsuspicious
- suitable for contact with drinking water