Workshop furniture

Code: NCW36ER32

30.91 Eur without VAT

(37.40 Eur with VAT)

Wooden collet holder ER 32 complete. Size 36D, the total size of the holder (width x depth) is 550 x 142 mm, the number of positions is 32, the diameter of the hole is 32 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW54ER32

39.94 Eur without VAT

(48.33 Eur with VAT)

Wooden collet holder ER 32 complete. Size 54D, the overall size of the holder (width x depth) is 855 x 142 mm, the number of positions is 50, the diameter of the hole is 32 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW36ER40

30.91 Eur without VAT

(37.40 Eur with VAT)

Wooden collet holder ER 40 complete. Size 36D, the overall size of the holder (width x depth) is 550 x 142 mm, the number of positions is 20, the diameter of the hole is 40 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW54ER40

39.94 Eur without VAT

(48.33 Eur with VAT)

Wooden collet holder ER 40 complete. Size 54D, the overall size of the holder (width x depth) is 855 x 142 mm, the number of positions is 32, the diameter of the hole is 40 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW36TH1

32.16 Eur without VAT

(38.91 Eur with VAT)

Wooden holder for storing punching tools of the Thick Turret system. Size 36D, the overall size of the holder (width x depth) is 550 x 142 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW36TH2

32.16 Eur without VAT

(38.91 Eur with VAT)

Wooden holder for storing punching tools of the Thick Turret system. Size 36D, the overall size of the holder (width x depth) is 550 x 142 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW36TH3

32.16 Eur without VAT

(38.91 Eur with VAT)

Wooden holder for storing punching tools of the Thick Turret system. Size 36D, the overall size of the holder (width x depth) is 550 x 142 mm. The complete assembly of the wooden holder is stored in tool frames and tool carriers.

Code: NCW36ST

2.02 Eur without VAT

(2.44 Eur with VAT)

Sorptive fabric for capturing emulsions, oils and other petroleum substances, size 845 x 120 x 3 mm. The textile can be recycled by wringing, spinning or it can be disposed of ecologically.

Code: NCW54ST

3.36 Eur without VAT

(4.07 Eur with VAT)

Sorptive fabric for capturing emulsions, oils and other petroleum substances, size 845 x 120 x 3 mm. The textile can be recycled by wringing, spinning or it can be disposed of ecologically.

Code: NCW36VA1

9.02 Eur without VAT

(10.91 Eur with VAT)

Metal tray under the wooden tool holder. Sizes 36D and 54D, tray height 12, 32 or 91 mm.

Code: NCW36DR1

16.80 Eur without VAT

(20.33 Eur with VAT)

Wooden holder for storing NC tools. Can be supplemented with a metal tray and absorbent fabric. Dimensions and types see the table and Product variants in the product detail.

Code: NCNN36

43.10 Eur without VAT

(52.15 Eur with VAT)

Tool carrier for NC cabinets, carts and table stands, size 36D or 54D. Supplied with a set of multi-function holders. Plastic and wooden tool holders are inserted and fixed in the carrier. The multi-functional holder allows you to adjust the angle of inclination of the carrier.

Code: NCNR3627

46.46 Eur without VAT

(56.22 Eur with VAT)

Tool frame for NC cabinets, carts and table stands, size 36 x 27D, 36 x 36D or 54 x 27D. Supplied with a set of multi-function holders. Plastic and wooden tool holders are inserted and fixed in the frame. The multi-functional holder allows you to adjust the angle of inclination of the tool frame.

Code: NCNRZ3627

46.46 Eur without VAT

(56.22 Eur with VAT)

Tool frame in drawers for storing NC tools, size 36 x 27D. Supplied with a set of multi-function holders. Plastic and wooden tool holders are inserted and fixed in the frame. The multi-functional holder enables the adjustment of the height of the frame in the drawer, depending on the length of the tool's clamping mandrels. A selection of cabinets can be found here.

Code: NCNRZ3636

51.26 Eur without VAT

(62.02 Eur with VAT)

Tool frame in drawers for storing NC tools, size 36 x 36D. Supplied with a set of multi-function holders. Plastic and wooden tool holders are inserted and fixed in the frame. The multi-functional holder enables the adjustment of the height of the frame in the drawer, depending on the length of the tool's clamping mandrels. A selection of cabinets can be found here.

Code: NCNRZ5427

60.58 Eur without VAT

(73.30 Eur with VAT)

Tool frame in drawers for storing NC tools, size 54 x 27D. Supplied with a set of multi-function holders. Plastic and wooden tool holders are inserted and fixed in the frame. The multi-functional holder enables the adjustment of the height of the frame in the drawer, depending on the length of the tool's clamping mandrels. A selection of cabinets can be found here.

Code: SOZDS

88.03 Eur without VAT

(106.52 Eur with VAT)

Plinth for machine cabinets 36 x 27D or 36 x 36D, height 100 mm. The cabinet is fixed to the plinth with screws - part of the plinth delivery. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Code: NCSOSR3627

79.78 Eur without VAT

(96.53 Eur with VAT)

Plinth for NC workshop cabinets POLAK, height 100 mm. Plinth designed for NC cabinets NCSR3627K. The cabinet is placed on the plinth and fixed using profiles located on the upper surface of the plinth. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Code: SK1-SO

120.10 Eur without VAT

(145.32 Eur with VAT)

Plinth for workshop cabinets POLAK type SK, height 100 mm. The cabinet is placed on the plinth and fixed using profiles located on the upper surface of the plinth. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Code: UK1-SO

86.59 Eur without VAT

(104.77 Eur with VAT)

Plinth for workshop cabinets POLAK type UK, height 100 mm. The cabinet is placed on the plinth and fixed using profiles located on the upper surface of the plinth. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Code: SP1-SO

93.41 Eur without VAT

(113.03 Eur with VAT)

Plinth for workshop cabinets POLAK type SP, height 100 mm. The cabinet is placed on the plinth and fixed using profiles located on the upper surface of the plinth. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.