Code: XD12
Vertical divider for POLAK wardrobes. The dividing wall can be ordered and attached additionally. For cabinets with a height of full description and parameters
Vertical divider for POLAK wardrobes. The dividing wall can be ordered and attached additionally. For cabinets with a height of 1200 mm.
| For cabinet height: | 1200 mm |
|---|---|
| Warranty (years): | 2 |
| Manufacturer: |
|
Code: XKS60
XKS sloped roof - various widths26.20 Eur without VAT
(31.70 Eur with VAT)
Sloped roof for wardrobes by POLAK. The roof can be ordered additionally, it is attached to the wardrobes without connecting material. The height of the rear part of the roof is 250 mm.
Code: XSO60
XS plinth - different widths18.60 Eur without VAT
(22.51 Eur with VAT)
Plinth for POLAK wardrobes. The plinth can be ordered additionally, it is attached to the wardrobes without connecting material. The height of the plinth is 100 mm.
Code: XD17
Vertical divider XD1724.48 Eur without VAT
(29.62 Eur with VAT)
Vertical divider for POLAK wardrobes on a pedestal bench. The dividing wall can be ordered and attached additionally.
Code: XZ30
Mirror XZ8.16 Eur without VAT
(9.87 Eur with VAT)
Interior mirror with two hooks. It is attached to the inside of the cabinet door. For doors with a width of 250, 300 or 400 mm.
Code: XR30
XR towel bar4.70 Eur without VAT
(5.69 Eur with VAT)
Towel rack. It is attached to the inside of the cabinet door. For doors with a width of 250, 300 or 400 mm.
Code: XPZ30
Hanging shelf XPZ2.02 Eur without VAT
(2.44 Eur with VAT)
Metal shelf. It is attached to the inside of the cabinet door. For doors with a width of 250, 300 or 400 mm.
Code: XB30
Shoe holder XB13.25 Eur without VAT
(16.03 Eur with VAT)
Shoe holder (pair). It is attached to the inside of the cabinet door. For doors with a width of 250, 300 or 400 mm.
Code: XJ
Nameplate XJ0.86 Eur without VAT
(1.04 Eur with VAT)
Plastic frame for inserting a paper name tag measuring 85 x 38 mm. It is hung in the door ventilation holes.
Code: XHP3
Internal hook XHP30.67 Eur without VAT
(0.81 Eur with VAT)
Plastic hook, hangs in the dividing wall of the wardrobe.
Code: XHP1
XHP1 hook0.67 Eur without VAT
(0.81 Eur with VAT)
Plastic hook, hangs from a circular crossbar.
Code: XHP2
External hook XHP21.25 Eur without VAT
(1.51 Eur with VAT)
Plastic hook, hangs in the door ventilation holes.
Code: XP30
Shelf for one XP cell5.57 Eur without VAT
(6.74 Eur with VAT)
Additional metal shelf for one cell. It must be ordered at the same time as the wardrobe - it cannot be ordered additionally. For cells with a width of 250, 300 or 400 mm.
In the new catalog you will find 280 pages with more than 2,000 items of workshop furniture. The developers of the company have moved the POLAK workshop furniture a little further. We believe that their creativity and energy, invested in their own production of original products, will bring maximum satisfaction to our customers.
The modern virtual world cannot be ignored today and that is why with the new Workshop Furniture Catalog 2018 in classic printed form, which you can order from us, an electronic catalog has also been launched, which brings even more information, instructions, tips, advice, videos and lots of other goodies. The links below allow you to download the catalog in PDF format (size 41.5 MB) or you can directly view the e-catalog online.
DOWNLOAD PDF CATALOG
BROWSE E-CATALOG
POLAK brand products are equipped with a QR or NFC code, which enables quick linking of the product with important information stored on the unique web portal smfu.eu. Here you will find detailed instructions, advice, explanations and you can also contact POLAK CZ employees.
The catalog, all product documentation, instructions, videos, tips and advice can be found at www.smfu.eu
|
Door landing area - the wardrobe unit has a door landing area around its entire perimeter. This design significantly reduces the risk of the door breaking into the body and at the same time makes it impossible to cut the bolt of the lock in the joint between the door and the body. |
Door hinges - wardrobe doors are hung on original metal hinges with an opening angle of 180°. Box cabinets are equipped with hidden hinges with an opening angle of 100°. |
Gliders - the lower part of the wardrobe is equipped with plastic gliders. The cabinet is more stable on the floor. Because it is not in direct contact with the floor, its lower part is less prone to corrosion. |
|
Inner hooks - polyamide hooks on the sides inside the wardrobe are standard equipment. |
Clothes hooks - there is a crossbar with three plastic hooks across the entire width of the wardrobe cell. The trapeze is removable. |
Entirely reinforced doors - the full-profile construction of all wardrobe doors increases the strength of the doors in twisting and bending. Together with the all-round landing surface of the door, it significantly increases safety and reduces the risk of the door breaking into the body of the cabinet. |
|
Locking - by default, the wardrobe cell is locked with a single-point bolt with a cylinder lock and two keys. It is also possible to replace the lock with a rotary lock for a padlock at no extra charge. |
Perforation of the body - the body of the wardrobes is equipped with holes for connecting wardrobes in rows, holes for attaching plinths or sloping roofs, holes for mounting on a base, holes for insertion of dividing additional bar. |
Shipping - wardrobes are shipped wrapped in PE foil as standard. The front of the wardrobes is equipped with polystyrene bumpers to prevent hinges and locks from coming into contact with neighboring wardrobes. |
|
Rubber bumpers - the cabinet doors rest on two rubber bumpers and significantly reduce noise when closing. |
Ventilation - ventilation of the cabinets is provided by perforated doors with 8 x 8 mm holes, the gap between the body of the cabinet and the door, and technological holes in the lid of the cabinet. |
Basic color design - standard colors apply to the range of wardrobes. The body of the wardrobes has the color RAL 7035, the doors RAL 5012. All other colors and color combinations are free of charge - see the POLAK color swatch in the left menu. |
 |
| Sokl | ||
| Objednací číslo | Šířka šatníku |
Hmotnost |
| XS025 | 250 mm |
2,1 kg |
| XS030 | 300 mm |
2,3 kg |
| XS040 | 400 mm |
2,6 kg |
| XS050 | 500 mm |
2,9 kg |
| XS060 | 600 mm |
3,2 kg |
| XS075 | 750 mm |
3,6 kg |
| XS080 | 800 mm |
3,8 kg |
| XS090 | 900 mm |
4,0 kg |
| Sokl je možné objednat dodatečně, k šatní skříni se připevňuje bez spojovacího materiálu, výška soklu 100 mm | ||
 |
| Dělící stěna pro buňky 400 mm | ||
| Objednací číslo | Výška šatníku |
Hmotnost |
| XD12 | 1200 mm |
3,5 kg |
| XD15 | 1500 mm |
4,5 kg |
| XD18 | 1800 mm |
6,0 kg |
| Dělící stěna pro jednu buňku, dělící stěnu je možné objednat a připevnit dodatečně | ||
 |
| Dělící stěna pro buňky 400 mm pro šatníky na lavici | |
| Objednací číslo | Hmotnost |
| XD17 | 6,0 kg |
| Dělící stěna pro jednu buňku, dělící stěnu je možné objednat a připevnit dodatečně | |
 |
| Nohy | |
| Objednací číslo | Hmotnost |
| XPNO | 0,7 kg / sada |
| Nohy není možné objednat dodatečně, výška nohou 100 mm |
|
 |
| Police | ||
| Objednací číslo | Průchozí šířka buňky |
Hmotnost |
| XP25 | 200 mm |
1,0 kg |
| XP30 | 250 mm |
1,2 kg |
| XP40 | 350 mm |
1,5 kg |
| Police pro jednu buňku, není možné objednat dodatečně | ||
 |
| Šikmá stříška | ||
| Objednací číslo | Šířka šatníku |
Hmotnost |
| XKS25 | 250 mm |
2,1 kg |
| XKS30 | 300 mm |
2,3 kg |
| XKS40 | 400 mm |
2,6 kg |
| XKS50 | 500 mm |
2,9 kg |
| XKS60 | 600 mm |
3,2 kg |
| XKS75 | 750 mm |
3,6 kg |
| XKS80 | 800 mm |
3,8 kg |
| XKS90 | 900 mm |
4,0 kg |
| Šikmou stříšku je možné objednat dodatečně, k šatní skříni se připevňuje bez spojovacího materiálu, výška zadní části střechy je 250 mm | ||
|
|
|
Tříbodové zamykání PZ3 - není možné objednat dodatečně |
||||||||||
|
|
|
|
||||||||||
|
|
|
|
||||||||||
|
|
|
|
||||||||||
 |
| Zrcátko | |
| Objednací číslo | Šířka buňky |
| XZ25 | 250 mm |
| XZ30 | 300 mm |
| XZ40 | 400 mm |
 |
| Hrazda | |
| Objednací číslo | Šířka buňky |
| XR25 | 250 mm |
| XR30 | 300 mm |
| XR40 | 400 mm |
 |
| Police | |
| Objednací číslo | Šířka buňky |
| XPZ25 | 250 mm |
| XPZ30 | 300 mm |
| XPZ40 | 400 mm |
 |
| Držák obuvi | |
| Objednací číslo | Šířka buňky |
| XB25 | 250 mm |
| XB30 | 300 mm |
| XB40 | 400 mm |
