Code: 7000168
Plastic dividing insert VND 700016839.14 Eur without VAT
(47.36 Eur with VAT)
Plastic dividing insert for VND DPK PD sockets.
Code: DPK_02_A
Three-drawer suspended workbench container, width 500, height 340, depth 700 mm. 2x socket 60, 1x 120 mm. Body color RAL 7035 full description and parameters
Three-drawer suspended workbench container, width 500, height 340, depth 700 mm. 2x socket 60, 1x 120 mm. Body color RAL 7035 light gray.
| Height: | 340 mm |
|---|---|
| Width: | 500 mm |
| Depth: | 700 mm |
| Mass: | 43.4 kg |
| Number of sockets: | 3 |
| Carrying capacity: | 160 kg |
| Load capacity of one drawer: | 80 kg |
| Welded product: | Yes |
| Warranty (years): | 2 |
| Manufacturer: |
|
Code: 7000168
Plastic dividing insert VND 700016839.14 Eur without VAT
(47.36 Eur with VAT)
Plastic dividing insert for VND DPK PD sockets.
Code: VND_DPK_11A
Internal division of sockets VND DPK 11A25.06 Eur without VAT
(30.32 Eur with VAT)
Internal division of sockets DPK VND 11A. Installation is possible in sockets where the height of the socket front is 60 - 120 mm.
Code: VND_DPK_11B
Internal division of VND DPK 11B sockets35.61 Eur without VAT
(43.09 Eur with VAT)
Internal division of sockets DPK VND 11. Installation is possible in sockets where the height of the socket front is 60 - 120 m.
Code: VND_DPK_11C
Internal division of VND DPK 11C sockets43.90 Eur without VAT
(53.12 Eur with VAT)
Internal division of sockets DPK VND 11. Installation is possible in sockets where the height of the socket front is 60 - 120 mm.
Code: DPS_01_BS40
Worktops beech joint, dimensions 1500 x 750 mm194.64 Eur without VAT
(235.51 Eur with VAT)
Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.
Code: DPS_01_MP40
Worktops beech multiplex, dimensions 1500 / 2000 x 750 mm425.04 Eur without VAT
(514.30 Eur with VAT)
Worktops beech multiplex, width 1500 or 2000 mm x depth 750 mm, thickness 40 mm. Made of layered and glued beech veneer, sanded and treated with a solution of linseed oil with additives, chamfered upper peripheral edges.
Code: DPS_01_BS40_M
Boards with a raised edge, dimensions 1500 / 2000 x 750 mm344.02 Eur without VAT
(416.26 Eur with VAT)
Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm.
Code: DPS_01_BS40_U1
Plates with sheet-metal front edge, dimensions 1500 / 2000 x 750 mm226.30 Eur without VAT
(273.82 Eur with VAT)
Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The front edge of the board is plated with zinc or stainless steel sheet 1 mm thick in a U shape - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.
Code: DPS_01_BS40_O1
Plated worktops, dimensions 1500 / 2000 x 750 mm265.49 Eur without VAT
(321.24 Eur with VAT)
Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.
Code: DPS_01_BS40_G1
Worktops with rubber, dimensions 1500 / 2000 x 750 mm328.47 Eur without VAT
(397.45 Eur with VAT)
Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.
Code: DPS_01_LM25_G1
LTD worktops with rubber, dimensions 1500 / 2000 x 750 mm272.46 Eur without VAT
(329.68 Eur with VAT)
LTD worktops with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.
Code: DPS_01_LM25
LTD worktops, dimensions 1500 / 2000 x 750 mm140.90 Eur without VAT
(170.49 Eur with VAT)
LTD worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.
Code: DPS_01_PP15BS25
Boards with upper PP and PE board, dimensions 1500 / 2000 x 750 mm584.01 Eur without VAT
(706.65 Eur with VAT)
Beech joint worktops with PP or PE board, width 1500 or 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint provides good physical properties and the PP and PE boards in turn provide good chemical properties. The color of the plates is white.
Code: DPK_02_B
Suspended table container DPK 02B487.50 Eur without VAT
(589.88 Eur with VAT)
Three-drawer suspended workbench container, width 500, height 340, depth 700 mm. 1x socket 60, 2x 90 mm. Body color RAL 7035 light gray.
Code: DPK_02_C
Suspended table container DPK 02C410.29 Eur without VAT
(496.45 Eur with VAT)
Two-drawer suspended workbench container, width 500, height 340, depth 700 mm. 2x socket 120 mm. Body color RAL 7035 light gray.
Code: DPK_01_E2
Table container DPK 01E2473.41 Eur without VAT
(572.83 Eur with VAT)
Two-drawer workbench container with door, width 500, height 810, depth 700 mm. 1x drawer 60, 1x 120 mm, 1x shelf. The product includes a perforated panel for tool holders. Body color RAL 7035 light gray.
Code: DPK_01_E1
Table container DPK 01E1399.32 Eur without VAT
(483.18 Eur with VAT)
One-drawer workbench container with door, width 500, height 810, depth 700 mm. 1x drawer 90 mm, 1x shelf. The product includes a perforated panel for tool holders. Body color RAL 7035 light gray.
Code: DPK_01_D
Table container DPK 01D263.83 Eur without VAT
(319.23 Eur with VAT)
One-door workbench container, width 500, height 810, depth 700 mm, 2 shelves. The product includes a perforated panel for tool holders. Body color RAL 7035 light gray. In stock in body color light gray, doors blue.
Code: DPK_01_C
Table container DPK 01C659.20 Eur without VAT
(797.63 Eur with VAT)
Five-drawer workbench container, width 500, height 810, depth 700 mm. 2x socket 90, 2x 120, 1x 240 mm. Body color RAL 7035 light gray. In stock in body color light gray, drawers blue.
Code: DPK_01_B
Table container DPK 01B607.72 Eur without VAT
(735.34 Eur with VAT)
Four-drawer workbench container, width 500, height 810, depth 700 mm. 1x drawer 90, 1x 150, 1x 180, 1x 240 mm. Body color gray RAL 7035. Drawer color blue RAL 5012.
Code: DPK_01_A
Table container DPK 01A533.72 Eur without VAT
(645.80 Eur with VAT)
Three-drawer workbench container, width 500, height 810, depth 700 mm. 1x socket 180, 2x 240 mm. Body color RAL 7035 light gray. In stock in body color light gray, drawers blue.
Code: DPK_03_A
Table container DPK 03A543.89 Eur without VAT
(658.11 Eur with VAT)
Three-drawer workbench container, width 720, height 810, depth 700 mm. 1x socket 180, 2x 240 mm. Body color RAL 7035 light gray.
Code: DPK_03_B
Table container DPK 03B617.37 Eur without VAT
(747.02 Eur with VAT)
Four-drawer workbench container, width 720, height 810, depth 700 mm. 1x drawer 90, 1x 150, 1x 180, 1x 240 mm. Body color RAL 7035 light gray.
Code: DPK_03_C
Table container DPK 03C672.20 Eur without VAT
(813.36 Eur with VAT)
Five-drawer workbench container, width 720, height 810, depth 700 mm. 2x socket 90, 2x 120, 1x 240 mm. Body color RAL 7035 light gray.
Code: DPK_03_D
Table container DPK 03D746.62 Eur without VAT
(903.41 Eur with VAT)
Five-drawer workbench container, width 720, height 810, depth 700 mm. 1x socket 60, 2x 90, 2x 120, 1x 180 mm. Body color RAL 7035 light gray.
Code: DPK_06_A
Table container DPK 06A661.50 Eur without VAT
(800.42 Eur with VAT)
Three-drawer workbench container, width 1000, height 810, depth 700 mm. 1x socket 180, 2x 240 mm. Body color RAL 7035 light gray.
Code: DPK_06_B
Table container DPK 06B738.72 Eur without VAT
(893.85 Eur with VAT)
Four-drawer workbench container, width 1000, height 810, depth 700 mm. 1x drawer 90, 1x 150, 1x 180, 1x 240 mm. Body color RAL 7035 light gray.
Code: DPK_06_C
Table container DPK 06C802.36 Eur without VAT
(970.86 Eur with VAT)
Five-drawer workbench container, width 1000, height 810, depth 700 mm. 2x socket 90, 2x 120, 1x 240 mm. Body color RAL 7035 light gray.
Code: DPK_06_D
Table container DPK 06D890.45 Eur without VAT
(1 077.44 Eur with VAT)
Six Workbench drawer container, width 1000, height 810, depth 700 mm. 1x socket 60, 2x 90, 2x 120, 1x 180 mm. Body color RAL 7035 light gray.
KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.
  |
Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm. |
|||
 |
Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray. |
|||
 |
Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm. |
|||
 |
The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm. |
|||
  |
There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.
|
|||
 |
PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black. Main advantages of PP board: - light, stable, elastic, sterile |
|||
|
PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black. The main advantages of PE board: - higher chemical resistance |
light gray RAL 7035 (A)
yellow RAL 1023 (B)
red RAL 3000 (B)
blue RAL 5012 (B)
green RAL 6024 (B)
dark gray RAL 7031 (B)
gray / front surfaces blue
RAL 1001
RAL 2008
RAL 3003
RAL 5003
RAL 5005
RAL 5010
RAL 5018
green RAL 6001
RAL 7032
RAL 8014
RAL 9003
RAL 1003
RAL 1007
RAL 1013
RAL 1015
RAL 1016
RAL 1017
RAL 1018
RAL 1021
RAL 1028
RAL 1033
RAL 2000
RAL 2002
RAL 2004
RAL 2009
RAL 2011
RAL 2012
RAL 3001
RAL 3002
RAL 3004
RAL 3005
RAL 3011
RAL 3020
RAL 4003
RAL 4006
RAL 4008
RAL 5002
RAL 5007
RAL 5008
RAL 5009
RAL 5011
RAL 5013
RAL 5014
RAL 5015
RAL 5017
RAL 5023
RAL 5024
RAL 6005
RAL 6017
RAL 6018
RAL 6019
RAL 6029
RAL 6033
RAL 6034
RAL 7001
RAL 7005
RAL 7012
RAL 7015
RAL 7016
RAL 7034
RAL 7036
RAL 7037
RAL 7038
RAL 7040
RAL 7043
RAL 7044
RAL 8004
RAL 8011
RAL 8016
RAL 8017
RAL 8019
RAL 9001
RAL 9002
RAL 9004
RAL 9005
RAL 9010
RAL 9011
RAL 9018
Surface treatment is carried out by the technology of electrostatic application of powder colors on the surface of products pre-treated with Fe phosphate. The colors are fired at a temperature of min. 180 °C approx. 20 min. Using automatic paint application and manual spraying, a uniform color layer is achieved, the thickness of which is on average 50-80 μm.
| Surcharges in % according to the ordered quantity in CZK without VAT | |||||||
| Body / front face combination | from CZK 0 | from 10,000 | from 20,000 | from 50,000 | from 100,000 | from 250,000 | from 500,000 |
| AA + AB | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| AC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| AD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| BA + BB | 10 | 8 | 6 | 3.5 | 1.5 | 1 | 0 |
| BC | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| BD | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| CA + CB | 50 | 35 | 16 | 12 | 3.5 | 2.5 | 1.5 |
| CC | 80 | 45 | 20 | 15 | 6 | 4 | 3 |
| CD | 100 | 50 | 25 | 20 | 8 | 6 | 5 |
| DA + DB | 80 | 45 |
20 | 15 |
6 |
4 |
3 |
| DC + DD |
100 | 50 | 25 | 20 | 8 | 6 | 5 |
| Category E | individual surcharge | ||||||
