Door landing area - the wardrobe unit has a door landing area around its entire perimeter. This design significantly reduces the risk of the door breaking into the body and at the same time makes it impossible to cut the bolt of the lock in the joint between the door and the body.

Door hinges - wardrobe doors are hung on original metal hinges with an opening angle of 180°. Box cabinets are equipped with hidden hinges with an opening angle of 100°.

Gliders - the lower part of the wardrobe is equipped with plastic gliders. The cabinet is more stable on the floor. Because it is not in direct contact with the floor, its lower part is less prone to corrosion.

Inner hooks - polyamide hooks on the sides inside the wardrobe are standard equipment.

Clothes hooks - there is a crossbar with three plastic hooks across the entire width of the wardrobe cell. The trapeze is removable.

Entirely reinforced doors - the full-profile construction of all wardrobe doors increases the strength of the doors in twisting and bending. Together with the all-round landing surface of the door, it significantly increases safety and reduces the risk of the door breaking into the body of the cabinet.

Locking - by default, the wardrobe cell is locked with a single-point bolt with a cylinder lock and two keys. It is also possible to replace the lock with a rotary lock for a padlock at no extra charge.

Perforation of the body - the body of the wardrobes is equipped with holes for connecting wardrobes in rows, holes for attaching plinths or sloping roofs, holes for mounting on a base, holes for insertion of dividing additional bar.

Shipping - wardrobes are shipped wrapped in PE foil as standard. The front of the wardrobes is equipped with polystyrene bumpers to prevent hinges and locks from coming into contact with neighboring wardrobes.

Rubber bumpers - the cabinet doors rest on two rubber bumpers and significantly reduce noise when closing.

Ventilation - ventilation of the cabinets is provided by perforated doors with 8 x 8 mm holes, the gap between the body of the cabinet and the door, and technological holes in the lid of the cabinet.

Basic color design - standard colors apply to the range of wardrobes. The body of the wardrobes has the color RAL 7035, the doors RAL 5012. All other colors and color combinations are free of charge - see the POLAK color swatch in the left menu.

Cylindrický zámek PZ1 - jednobodová závora, 2 klíče

Uzávěr pro visací zámek PU1 - bezpečnostní uzávěr se po zavěšení visacího zámku volně protáčí. Není tak možné násilné protočení uzávěru v montážním otvoru. Dodáváno bez visacího zámku.

Tříbodové zamykání PZ3 - není možné objednat dodatečně

Klíč planžeta PK - polotovar klíče cylindrického zámku

Klíč 3K - další klíč k cylindrickému zámku

Hlavní klíč GK - slouží jako univerzální klíč v případě nutnosti, například při ztrátě příslušného klíče

Háček XHP1 - plastový háček, zavěšuje se na kruhovou hrazdu

Vnější háček XHP2 - plastový háček, zavěšuje se do větracích otvorů dvířek

Vnitřní háček XHP3 - plastový háček, zavěšuje se do dělící stěny šatníku

Jmenovka XJ - plastový rámeček pro zasunutí papírové jmenovky rozměru 85 x 38 mm, zavěšuje se do větracích otvorů dvířek

Podložka pod boty - plastová podložka pod boty k zachycení nečistot a vody, její originální konstrukce umožňuje snadnou manipulaci a čištění